Products Leopard Panel Meters, Meter Bargraphs and Process Controllers

An economically programmable meter relay with isolated 4 to 20 mA retransmission for measurement and control applications in a 96x48mm , 96x24mm and our Bargraph in a 144x36mm case.

• 38 I-Series Plug-in Input Signal Conditioners (include AC / DC Current, AC / DC Voltage, Load Cell, Pressure, Process, Resistance, Temperature, 4 to 20 mA)
• Optional isolated 16 bit analog output. User or factory scalable to 4 to 20 mA, 0 to 20 mA or 0 to 10 V across any desired digital span from ± one count to the full scale range of – 1999 to 9999
• Auto-sensing AC/DC power supply (85-265 VAC / 95-300 V DC or optional 15-48 VAC / 10-72 V DC)
• 5, 10 or 24 V DC excitation (for external transmitters, pressure transducers, load cells and resistance bridge type sensors)
• Standard red or optional green or super bright red 4-digit LED (red or green 0.8” LED large display option) with display range –1999 to 9999
• Bragraphs come in a mono color or tricolor with 4 digit or bragraph only
• Four annunciator LEDs provide front panel alarm status indication for up to four set points
• Two 9 Amp Form C and two 4 Amp Form A relays, or optionally four 4 Amp Form A relays , available (DL models only)
• Three programming buttons and selectable ranges from the front panel
• Selection of relay activation above or below each set point
• Hysteresis, Delay on make and Delay on break, Peak and Valley