4" Switchboard Panel Mounting Adapter Plate
OP-PMA-083$16.00
Switchboard Style Panel Mounting Plate
OP-PMA/SWB-2$33.00
Switch Board Panel Mounting Adapter, 1/8 DIN (96x48mm) or two 1/16 DIN (96x24mm)
OP-PMA/SWB-3$39.00
Switch Board Panel Mounting Adapter, 1 of 1/8 DIN (96x48mm) and 1 of 1/16 DIN or Three 1/16 DIN (96x24mm)
OP-PMA/SWBD$39.00
Switch Board Panel Mounting Adapter, 1/8 DIN (96x48mm) Mosaic Fitting
Bases
TDX-BASEACA$185.00
Calibration Base Station
TDX-BASEHZV$164.00
Calibration Base Station
Cables and Serial Communications
91-USB/CBL$18.00
USB Cable
OM-CABLE232$18.00
RS232: DB9 female to RJ6 phone plug adapter plus 6ft RJ6 Cable
OM-CABLE485$18.00
RS485: DB9 female to RJ6 phone plug adapter plus 6ft RJ6 Cable
URC-1020$53.00
Transmitter to Laptop USB Interface Cable
Cases and Case Accessories
75-DBBZ9648F$7.00
Black Bezel for 96x48mm Case.
75-DBBZ96X24$7.00
Black Bezel for 96x24mm Case.
75-DBZ144X36$7.00
Black Bezel for 144x36mm Case
75-DMC14436B$14.00
Mounting Slide Clips - Wide (2 pc) 144x36mm Case Size
75-DMC144X36$14.00
Mounting Side Clips - Standard (2 pc) Extra Set, 144x36mm Case Size
75-DMTC96X24$11.00
Mounting Side Clips, Extra Set (96x24mm case size)
75-DMTCLIPF$12.00
Mounting Side Clips, extra set (96x48mm case size)
75-DTP144x36$23.00
Panel Cut-Out Trim Plate Set (2 pieces) for 144x36mm meter.
75-DTP2X9624$17.00
Panel cutout metal trim plate 96x48mm (2x 1/16 DIN &1/8 DIN)
75-DTP3X9624$17.00
Panel cutout metal trim plate 96x72mm (3x 1/16 DIN)
75-DTP96X24$17.00
Panel cutout metal trim plate 96x24mm (1/16 DIN)
75-GBBZ144X2$7.00
Black Bezel for 144x24mm Case
75-GBBZ144X7$7.00
Black Bezel for 144x72mm Case
75-MUBEZEL$7.00
Black Bezel for 48x24mm case.
75-MUMTBRKT$11.00
Mounting Side Clips, extra set (48x24mm case size).
75-PMMCLIPEF$10.00
Extra / Replacement Ratcheting Mounting Clips (one pair)
75-PMMMCLIPF$10.00
Sliding mounting clips, extra set (2 pieces) for Dashboard meter case.
75-RPFILTER$18.00
Replacement Red Lense for Red LEDs.
75-SDMTCLIP$12.00
Screw Mounting Clips (2 pc).
76-DX35BLKM4$28.00
DX-35 Black Membrane Type Faceplate
DN.CAS96X48B$39.00
96x48mm Complete Case with Bezel
NEMA.RPUM$41.00
NEMA RP/UM Case with sliding mounting clips and dust & splash proof faceplate.
OP-MTL144X36$39.00
Metal Surround Case. THE "OP-MTLCLIP" (2pc Screw mounting clips) BELOW WILL ALSO BE SELECTED, AS THEY ARE NECESSARY TO INSTALL THE METAL CASE.
OP-MTL144X72$44.00
Metal Surround Case. THE "OP-MTLCLIP" (2pc Screw mounting clips) BELOW WILL ALSO BE SELECTED, AS THEY ARE NECESSARY TO INSTALL THE METAL CASE.
OP-MTL96X24$30.00
Metal Surround Case.
OP-MTL96X48$33.00
Metal Surround Case. Cannot be used with the Panel Cutout Reinforcer and the Panel to Case Seal Adaptor. THE "OP-MTLCLIP" (2pc Screw mounting clips) BELOW WILL ALSO BE SELECTED, AS THEY ARE NECESSARY TO INSTALL THE METAL CASE.
OP-MTLCLIP$14.00
Screw Mounting Clips (2pc) to screw tighten slide brackets
OP-PA/144X36$28.00
Panel Adapter for 144x36mm meter to fit 6" Edgewise panel cutout
SL.CASERED$17.00
Slim Bezel Case, Red Window with Mounting Hardware.
Connectors
93-11PFKMC$20.00
Extra Screwless, Push-in Spring, 11-pin Screw Terminal Connector Plug (female)
93-PLUG2P-DP$5.00
Extra Screw Terminal Connector, 2 Pin Power Plug
93-PLUG2P-DR$5.00
Extra Screw Terminal Connector, 2 Pin Plug
93-PLUG3P-DR$7.00
Extra Screw Terminal Connector, 3 Pin Plug
93-PLUG4P-DR$9.00
Extra Screw Terminal Connector, 4 Pin Plug
93-PLUG5P-DR$10.00
Extra Screw Terminal Connector, 5 Pin Plug
93-PLUG6P-DR$11.00
Extra Screw Terminal Connector, 6 Pin Plug
CN-L10$11.00
Dual Row 10 Pin Edge Connector, Solder Type.
CN-L15$17.00
Dual Row 15 Pin Edge Connector.
CN-L18$20.00
Dual Row 18 Pin Edge Connector, Solder Type
CN-PUSH/AM$28.00
Push-on Screw Terminal Block Connector.
CN-PUSH/BN$28.00
Push-on Screw Terminal Block Connector for BN-Series. Note: Do not use with BN-35BCD or BN-40BCD meters. When connector is used with BN-45 and BN-45I, display is limited to three decimal points.
CN-PUSH/CM$28.00
Push-on Screw Terminal Block Connector.
CN-PUSH/DD$28.00
Push-on Screw Terminal Block Connector for DD-40VHZ.
CN-PUSH/FI$50.00
Push-on Connector for FI Bargraphs Serial and/or Analog Output
CN-PUSH/SM$28.00
Push-on Screw Terminal Block Connector.
CN-PUSH/SP$28.00
Push-on Screw Terminal Block Connector.
CN-S15$15.00
Dual Row 15 Pin Edge Connector, Solder Type.
CN10-PREWIRE$39.00
Pre-Soldered and Pre-Wired Dual Row 10 Pin Edge Connector with four AGW 22 wires
CN15-PREWIRE$50.00
Pre-Soldered and Pre-Wired Dual Row 15 Pin Edge Connector with four AGW 22 wires
TB-KIT$11.00
Extra / Replacement Terminal Block Connector Kit (3).
Descriptor Adhesive
75-DESCRIPTR$7.00
Clear adhesive descriptors label for face plate
External DIN Rail Mounting Breakout Box
OP-IDC16/3$98.00
16pin IDC Cable, 3ft. Used only with ISS7, ISS8, IST1, or IST2 Input modules.
OP-IDC26/3$108.00
26pin IDC Cable, 3ft. Used only with OR81 and/or OR82 Relay output modules.
OP-TERMBLK16$126.00
16pin, Din Rail Terminal Block. Used only with ISS7, ISS8, IST1, or IST2 Input modules.
OP-TERMBLK26$149.00
26pin DIN Rail Terminal Block. Used only with OR81 and/or OR82 Relay output modules.
High Strength Panel Mounting Adapter Kit
OP-PMA96X48$46.00
Panel Cutout Reinforcer with 2 sets of Slide Mounting Brackets and Screw Mounting Clips. Cannot be used with Metal Surround Case.
Metal Surround and Mounting Kit
75-DRAD35$24.00
Mounting Kit for DIN Rail Mount
DN-CAS9624R$28.00
DIN Rail Mount Metal Surround with Mounting Clips
DN-CAS9648FR$82.00
Front DIN Rail Mount Metal Surround with Mounting Clips
DN-CAS9648R$39.00
DIN Rail Mount Metal Surround with Mounting Clips
NEMA-4X Clear Lockable Water and Dust Proofing Cover
OP-N4/144X36$50.00
144x36mm clear lockable splash proof front cover - NEMA 4X
OP-N4X/96X48$44.00
96x48mm (3.78"x1.89") Clear Lockable NEMA 4X Splash Proof Meter Front Cover
NEMA-4X Panel to Case Seal Adapters
OP-PSA/96X48$35.00
Panel to Case Seal Adapter with O-Ring and Foam Gasket. Cannot be used with Metal Surround Case.
Power Supply
PS-2405$38.00
24VDC Regulated Power Supply, 0.5A Output
PS-505$60.00
General purpose low ripple, regulated power supplies suited for +5V DC powered DPM’s. Provides user selectability for 100-125 V AC or 208-250 V -AC operation.
The PS-505 power supply has been replaced with the PS-510 power supply. The dimensions are identical, and the PS-510 is a complete compatible replacement for the discontinued PS-505.
PS-510$60.00
5V 1 Amp output. General purpose low ripple, regulated power supplies suited for +5V DC powered DPM’s. Provides user selectability for 100-125 V AC or 208-250 V -AC operation.
(The PS-505 power supply has been replaced with the PS-510 power supply. The dimensions are identical, and the PS-510 is a complete replacement for the discontinued PS-505.)
PS-520$38.00
5VDC Regulated Power Supply, 2A Output
Short Depth 96x48 Remote Displays
OP-DI/RDISP$76.00
Remote Display Case for DI meters with Cable. OP-DI/RDND is needed and will be add to shopping cart when this option is selected.
OP-DI/RDND$59.00
Remote Display Adapter for DI meters with No Display option. OP-DI/RDISP is needed and will be add to shopping cart when this option is selected.
OP-TL/RDISP$109.00
Remote Display/Programmer for TL series transmitters with Cable and Belt clip Carrying Case.
Utility Software
CF-UTILITY$0.00
Downloadable Tiger Meter/Controller Configuration Utility Software.
No technical support is offered for this software.